Learn
Learn to cast.
Your first FormCast+ piece, step by step. Each guide takes a few minutes to read.
The whole process
- Mix ratio
- 3:1 powder to water
- Mixing
- About 1 minute
- Working time
- 8–10 minutes
- Demould
- 25–30 minutes
- Full cure
- 24–48 hours
Your first piece
Read these in order. That's everything you need.
-
01
Before you start
What you need and how to set up your table.
4 min read
-
02
Get the mix right
Weigh powder and water. 3:1 for detail, 4:1 for strength.
3 min read
-
03
Pour and demould
Pour slowly, tap out bubbles, demould after 25 to 30 minutes.
2 min read
-
04
Finish it
Once cured, sand it, seal it or leave it as it is.
2 min read
Something went wrong?
Most problems have one cause and one fix.
When you're ready
All guides
Stuck? Send us a photo.
Tell us what you did and we'll help you fix it.
